Call Us: (813) 434-4900

Amerex

Model 240 Water Fire ExtinguisherAMEREX Model 240 Water Fire Extinguisher

AMEREX Model 240 utilizes the cooling, soaking and penetrating effect of a 45-55 ft. stream of WATER. The 55 sec. discharge time makes it very effective for inexperienced operators for use on Class A fires.

Specifications:

Rugged

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Polished Stainless Steel Cylinders
  • All Metal Valve Construction
  • Exclusive crevice free, butt welded cylinders
  • Temperature Range +40°F to 120°F

Clean

  • Leaves no powder residue

User Friendly

  • Maximum visibility during discharge
  • Large Loop Stainless Steel Pull Pin
  • Bar Coded and Bi-lingual Labels

Model B262 Wet Chemical Fire ExtinguisherAMEREX B262

Wet chemical extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers you can purchase. Each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based agent.

Specifications:

Rugged

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Polished Stainless Steel Cylinders
  • All Stainless Steel Valve Construction
  • Exclusive Crevice Free, Butt Welded Cylinder
  • Tested on Commercial Deep Fat Fryers to ANSI / UL 711Test Protocol and Safe to Use on Class C Fires
  • Class 2A Rated to Meet Fire Code Occupancy Hazard Requirements
  • Temperature Range +40°F to 120°F

User Friendly

  • Factory Charged
  • Large Loop Stainless Steel Pull Pin
  • Swivel Connection on Hose Allows Nozzle to be Oriented for Proper Use
  • Nozzle Grip Design with 45° Angle for Easy “Overhead” Application
  • Agent Discharged as a Fine Mist Helps Prevent Grease Splash and Re-flash While Cooling the Appliance
  • Precise Extinguishing Agent Application
  • Bar Coded and Bi-lingual Labels

Option

  • USCG Approved with Bracket Listed on UL Label

Model 250 Water & Foam Fire Extinguisheramerex 250 2.5 gal

Class A:B extinguisher. Easy and effective application with air aspirated nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles.

Specifications:

Rugged

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Polished Stainless Steel Cylinders
  • All Metal Valve Construction
  • Exclusive crevice free, butt welded cylinders
  • Temperature Range +40°F to 120°F

Clean

  • Leaves no powder residue

User Friendly

  • Maximum visibility during discharge
  • Large Loop Stainless Steel Pull Pin
  • Bar Coded and Bi-lingual Label

Model 322 & 330 Carbon Dioxide Fire Extinguishers

Carbon Dioxide is discharged as a white cloud of “snow” which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.

Specifications: 

Model 330

Model 330

Model 322

Model 322

Rugged

  • 5 Year Warranty
  • All Metal Valve Construction
  • Rust free aluminum cylinders
  • Durable High Gloss Polyester Powder Paint
  • Temperature Range -22°F to 120°F

User Friendly

  • Meets Many Hospital Medical Equipment Requirements
  • Large Loop Stainless Steel Pull Pin
  • Model 322NM Independently Tested and Approved for use in MRI Facilities to 7 Tesla
  • Model 322NM Has Sanitary White Paint Finish (easy to clean)
  • Bar Coded and Bi-lingual Labels

Option

  • USCG Approved with Bracket Listed on UL Label

Model B409T, B457 & A412 Regular Chemical Fire Extinguishers

Regular extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator.

Specifications:

Rugged

  • 6 Year Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Temperature Range -65°F to 120°F

User Friendly

  • Easy and More Economical to Maintain and Service
  • Large Loop Pull Pin
  • Bar Coded and Bi-lingual Labels

Option

  • USCG Approved with Bracket Listed on UL Label
Model A412

Model A412

Model B457

Model B457

Model B409T

Model B409T


Model B402T, B456 & A411 ABC Dry Chemical Fire Extinguishers

ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.

Specifications:

Rugged

  • 6 Year Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Temperature Range -65°F to 120°F

User Friendly

  • Easy and More Economical to Maintain and Service
    Large Loop Pull Pin
    Bar Coded and Bi-lingual Labels

Option

  • USCG Approved with Bracket Listed on UL Label
Model B402T

Model B402T

Model B456

Model B456

Model A411

Model A411

LION Sales Excellence Award (Top 10 Largest-Buying LION Dealer, 2014)

© 2017 Tom Smith Fire

Web Design and Domain names by Web.com