Call Us: (813) 434-4900

Shelby Gloves

Style No. 5225 & 5226

Specifications:

5226

5226

5225

5225

  • Heavy Weight, Fire Retardant, Heat Resistant, 3.25 to 4.0 oz., Shelby Abrasion Resistant ,
  • Multidirectional Fiber Structure, Brushed Pigskin palm & Gold Koala cowhide back.
  • 8 oz. S.E.F. Modacrylic Fleece Laminated to Gore RT7100 Glove Barrier Fabric.
  • Gore (PTFE) RT7100 Glove Barrier Fabric
  • Nomex 10.5 oz per yard, Double ply, 4” Wristlet. Wristlet sewn to liner, and then sewn separately to the glove shell. Not required on #5226.
  • 3” x 3 1⁄2” Round Leather Pull, Sewn to Wristlet & Glove Body
  • Sewn with high burst Strength Kevlar (30/5) lock stitch, 8-10 stitches per inch.
  • 1⁄4” fire retardant, heat resistant split cowhide hanger loop.
  • Glove is constructed, tested and labeled in accordance with the NFPA Standard on Protective Ensemble for Structural Fire Fighting, NFPA 1971-2013 Edition.
  • Made in U.S.A.

Comes in Gauntlet Style: #5226


Style No. 5227 & 5228

Specifications:

5228

5228

5227

5227

  • Heavy Weight, Fire Retardant, Heat Resistant, 3.50 to 4.0 oz., Midnight Blue Koala Tanned, Cowhide. Koala Tanned leather will remain soft after repeated soakings.
  • 8 oz. S.E.F. Modacrylic Fleece Laminated to Gore RT7100 Glove Barrier Fabric
  • Gore (PTFE) RT7100 Glove Barrier Fabric.
  • Nomex 10.5 oz per yard, Double ply, 4” Wristlet. Wristlet sewn to liner, and then sewn separately to the glove shell. Not required on #5228.
  • 3” x 3 1⁄2” Round Leather Pull, Sewn to Wristlet & Glove Body
  • Sewn with high burst Strength Kevlar (30/5) lock stitch, 8-10 stitches per inch.
  • 1⁄4” fire retardant, heat resistant split cowhide hanger loop.
  • Glove is constructed, tested and labeled in accordance with the NFPA Standard on Protective Ensemble for Structural Fire Fighting, NFPA 1971-2013 Edition.
  • Made in U.S.A.

Comes in Gauntlet Style: #5228


Style No. 5229

Specifications:5229

  • Heavy Weight, Fire Retardant, Heat Resistant 3.50 to 4.0 oz., Koala® Tanned Cowhide. This tanned leather will remain soft after repeated soakings.
  • 8 oz. S.E.F. Modacrylic Fleece Laminated to Gore RT7100 Glove Barrier Fabric.
  • Gore (PTFE) RT7100 Glove Barrier Fabric.
  • Nomex 10.5 oz per yard, Double ply, 4” Wristlet. Wristlet sewn to liner, and then sewn separately to the glove shell. Not required on #5229G
  • 3” x 3 1⁄2” Round Leather Pull, Sewn to Wristlet & Glove Body
  • Sewn with high burst Strength Kevlar (30/5) lock stitch, 8-10 stitches per inch
  • 1⁄4” fire retardant, Split Cowhide, Hanger Loop
  • Firewall Steamblock® Insulative pad shall be a fire retardant silicone foam elastomer with an integral skin on the top and bottom surfaces and be attached in the side seams of the glove. The Firewall Steamblock® Insulative pad shall extend on the back of the glove from the bottom/wrist of the glove to approximately 1⁄4” below the crotch of the fingers.
  • Glove is constructed, tested and labeled in accordance with the NFPA Standard on Protective Ensemble for Structural Fire Fighting, NFPA 1971-2013 Edition.
  • Made in U.S.A.

Style No. 5280 & 5280G

Specifications:

5280G

5280G

5280

5280

  • Heavy Weight, Fire Retardant, Heat Resistant, 3.50 to 4.0 oz., Grain Elk hide on the glove back. Shelby Abrasion Resistant, Mulitirectional Fiber Structer, Brushed Pigskin on the palm.
  • 8 oz. S.E.F. Modacrylic Fleece Laminated to Gore RT7100 Glove Barrier Fabric.
  • Gore (PTFE) RT7100 Glove Barrier Fabric.
  • Nomex 10.5 oz per yard, Double ply, 4” Wristlet. Wristlet sewn to liner, and then sewn separately to the glove shell. Not required on #5280G.
  • 3” x 3 1⁄2” Round Leather Pull, Sewn to Wristlet & Glove Body.
  • Sewn with high burst Strength Kevlar (30/5) lock stitch, 8-10 stitches per inch
  • 1⁄4” fire retardant, heat resistant split cowhide hanger loop.
  • Glove is constructed, tested and labeled in accordance with the NFPA Standard on Protective Ensemble for Structural Fire Fighting, NFPA 1971-2013 Edition.
  • Made in U.S.A.

Comes in Gauntlet Style: #5280G


Style No. 5002 & 5002F

Specifications:

5002F

5002F

5002

5002

  • Heavy 3 to 3.25 oz, popcorn and black color abrasion resistant, multidirectional fiber structure, brushed pigskin. Tanned hide does not contain PCP (pentachlorophenol), it’s salts or esters.
  • 4” Nomex wristlet, 5002F No Wristlet
  • Gunn cut, keystone double layer thumb crotch protection. 1/8” wide, double row stitching around inset thumb.
  • Leather, 6mm x 51mm cut length, double stitched 38mm apart
  • Black 29mm Cotton (only model 5002F).
  • 10mm Natural Elastic
  • Lock-Stitch sewn with kevlar thread, 8-10 stitches per inch. Spun Kevlar thread, tex 70,27.5 to 30.0/4 count, minimum break 12.0#
  • Meets NFPA 1977, 2011 Edition
  • Made in U.S.A.

Comes in Gauntlet Style: #5002F


Style No. 2533

Specifications:2533

  • Abrasion Resistant Brushed Pigskin
  • Reinforced Keystone Thumb & Palm
  • Lock-Stitch Sewn with Kevlar Thread
  • Elastic Snuggler at Wrist
  • Wash & Wear
  • Made in U.S.A.

Style No. 5200 & 5200G

Specifications:

5200

5200

  • 7 oz. Aluminized PBI/Kevlar Knit .025 in. thick (.063 cm) Flexible Pleat on Back of Hand.
  • 12 oz. per square yard Tech Fleece. 6 osy Kevlar and FR Lenzing combined with 6 osy Modacrylic fleece.
  • Crosstech PTFE Insert fully bonded to 12 osy Tech Fleece.
  • 3.0 – 3.50 oz. Black Split Cowhide on palm side.
  • Firewall Steamblock insulative pad shall be a fire retardant silicon foam elastomer with integral skin. Firewall Steamblock Insulative pad attached in glove seams and shall extend on back of glove to crotches of fingers.
  • 10.5 oz. per yard, double ply black Nomex, 4” in length. Not on model 5200G.
  • 3” x 3.5” round leather pull sewn to wristlet and glove body

    5200G

    5200G

  • High burst strength Kevlar 30/5, lock stitch, 8-10 spi
  • Glove is constructed, tested and labeled in accordance with the NFPA Standard on Protective Ensemble for Proximity Fire Fighting, NFPA 1971, 2013 Edition
  • Made in U.S.A

Comes in Gauntlet Style: #5200G


Style No. 2500

Specifications:2500-black

  • Air-Textured ,high-tenacity nylon Cordura, Chartreuse back, black palm.
  • Fluffed Cotton Terry, braw wipe.
  • Knuckle Protector – Vibra-sorb® pad with pleated heavy grade hook & loop, outlined with reflective trim.
  • Fingers – Form Fitting vented and curved protective rubber guards welded to finger backs. Rubber & Kevlar palm side tips, rubber and reflective finger tip backs.
  • Kevlar tear and abrasion resistant fabric. Triple stitched.
  • Rubber and Kevlar finger tip grips
  • Nylon Tafta wrist snuggler, Debris Blocker
  • Kevlar thread
  • Hidden cord carabineer loop beneath ribbed rubber donning pull.

Style No. 2520

Specifications:2520

  • Hi-Vis chartreuse color synthetic mesh material. Injection molded TPR padding covering back of hand and knuckles.
  • Black grain goat leather palm with duel stitched synthetic sure grip palm & finger pads
  • Silver reflective little and ring fingertip backs
  • Adjustable hook & loop on cushioned wrist band with blue nylon pull loop.
  • Black synthetic stretch material
  • Cotton Terry with TPR padding
  • Alycore (Stainless steel alloy) inside palm, providing zone cut and puncture resistance.

Style No. 2511

Specifications:2511

  • Air-Textured high-tenacity nylon Cordura, blue back, black palm.
  • Fluffed Cotton Terry, braw wipe.
  • Knuckle Protector – Vibra-sorb® pad with pleated heavy grade hook & loop, outlined with reflective trim.
  • Fingers – Form Fitting vented and curved protective rubber guards welded to finger backs. Armor Dillo Knuckle Protection with Kevlar & leather. Rubber & Kevlar palm side tips, rubber and reflective finger tip backs.
  • Hipora waterproof barrier and soft breathable Bemberg Lining.
  • Kevlar tear and abrasion resistant fabric. Triple stitched.
  • Rubber and Kevlar finger tip grips
  • Nylon Tafta wrist snuggler, Debris Blocker
  • Kevlar Thread
  • Hidden cord carabineer loop
  • Ribbed Rubber Donning Pull

Style No. 2517

Specifications:2517

  • Low profile form fitting knit glove perfect for a wide variety of jobs
  • Pre-curved design and super tacky latex palm lets nothing slip through your fingers
  • Tough glove that provides comfort and durability
  • Small price Big Value!

Style No. 2518

Specifications:2518

  • Pre-Curved Glove
  • Beveled Fingers with Wrap Around Sidewalls & Tips
  • Two-Way Stretch & Air Flow Back with Custom Impact Protection
  • Premium Grade Goatskin Leather
  • Cotton Terry Braw Wipe
  • Reinforced Rubber Pull with Hidden Cord Carabineer Loop
  • Neoprene Cuff with Hook & Loop Closure
  • Kevlar Reinforced Stitching

LION Sales Excellence Award (Top 10 Largest-Buying LION Dealer, 2014)

© 2017 Tom Smith Fire

Web Design and Domain names by Web.com